- * Fitment: The shock absorbers are compatible for Mitsubishi Lancer & Ralliart (CY2A/CZ4A) 2008-2016
- * High-quality Spring: Front: 6kg/mm (336 lbs/in), Rear: 9kg/mm (504 lbs/in); The spring distortion is less than 0.04% under 600,000 times continuously tests
- * Adjustable Performance: Adjustable ride height (lowering 0-60mm); Adjustable pre-load spring tension; 24 ways Adjustable Damper
- * Increased Hardness: Most components of the suspension parts are made from 6061 aluminum with T6 for increased strength and rigidity
- * Pillow ball top mount: Pillow ball bearing top mounts for camber adjustment are designed to combat noise while tuning and offer greater feed back
- * Notice: Please confirm your car model, model year and car chassis before purchase the coilover. If you have any question, please feel free to contact us
Combination offer
- A
- B
- C
- D
- E
- F
- G
- Description
- Reviews (0)
- Q & A ()
- ESTIMATE SHIPPING
- INSTALLATION
- Product Installation
- Technique Instruction
Introduction
MXR-B3 series(also called MXR-SLC) based on MXR-B2 series(also called MXR-SNA) coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions.
Application
Compatible for Mitsubishi Lancer & Ralliart (CY2A/CZ4A) 2008-2016
excludes Lancer Evolution
Specification
Top mounts: pillow ball top mount with camber plate front, standard rubber top mount rear.
Damping: 24 levels rebound damping adjustable.
Front Spring Rate: 9kg/mm (504 lbs/in).
Rear Spring Rate: 6 kg/mm (336 in/lbs).
Adjustable Height: Yes lowering 1" to 3".
Shock type: Twin tube.
Spring Preload: 7-10 mm.
Color: gold.
Package included
product included: complete coilovers 2 front and 2 rear,a pair wrench for height adjustment.
Dimension
Gross weight: 23.8kg
Package size: 63*51*20cm
Feature
1. Lowered height adjustment from 1" - 3" which allow lower center of gravity and also add a more aggressive stance.
2.Camber plate top mounts help to eliminate the need for a separate camber kit.(Front Only)
3.Pillow ball top mount - It improves the steering feel and response.(Front Only)
4. Rubber top mounts help to deliver a smooth and forgiving ride for city use at any speed and rubber joints assist in absorbing hard impacts. (only rear)
5. Twin-Tube structure allows sufficient stroke within the shock absorber.
6. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation.
7. Separate height adjustment does not affect damper stroke.
8. Height can be adjusted with coilovers installed on the vehicle.
9. High Tensile performance spring - STRESS TESTED OVER 600,000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability and performance.
10. Height Adjustment tools included.
11. Full rebuildable.
12.A 24 rebound dampening adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions.
Warranty: one year warranty for any manufacturing defect
Enter your destination to get a shipping estimate.