Coilovers Suspension Kit compatible for Mazda Mazda6 2003-2007 Coilovers Suspension Struts Set

  • * Fitment: The shock absorbers are compatible For Mazda Mazda6 all model 2003-2007,For mazdaspeed6 all model 2003-2007
  • * High-quality Spring: Front: 9 kg/mm (504 in/lbs), Rear: 9 kg/mm (504 in/lbs); The spring distortion is less than 0.04% under 600,000 times continuously tests
  • * Adjustable Performance: Adjustable ride height (lowering 0-60mm); Adjustable pre-load spring tension;
  • * Increased Hardness: Most components of the suspension parts are made from 6061 aluminum with T6 for increased strength and rigidity
  • * Pillow ball top mount: Pillow ball bearing top mounts for camber adjustment are designed to combat noise while tuning and offer greater feed back
  • * Notice: Please confirm your car model, model year and car chassis before purchase the coilover. If you have any question, please feel free to contact us
Stock In Stock
Item Number 3002104561

Combination offer

  • A
  • B
  • C
  • D
  • E
  • F
  • G
CO-MAZ6-0307-G-NA-VG2
CO-MAZ6-0307-G-NA-VG2
1. Adjustable Height
1. Adjustable Height
Allowing you adjust the whole coilovers to your favorite ride heigt.
Adjustable lower mount allows maximum suspension travel
2. High Quality Components
2. High Quality Components
Camber plates and Collars are made from 6061-T6 Billet Aluminum to increase hardness
Pillow ball top mount is designed for improving Steering feel and response
3.Hi-Tensile Performance Spring
3.Hi-Tensile Performance Spring
Under 600,000 times continuously test, the spring distortion is less than 0.04%. With the special surface treatment, the spring durability and performance are highly improved
4.Twin-tube Constructioneal
4.Twin-tube Constructioneal
Dust boot protects damper seal
Twin-tube shock design reduces oil leakage problems
FA Synthetic Shock Oil increase damper performance

Introduction

MXR-B2 series(also called MXR-SNA) coilovers are designed as an entry level for street use. It features with full length height adjustable and adjustable camber plates (applicable for some vehicles), which offers you a lowered stance, improved performance for your daily use vehicle.

Application

compatible for Mazda6 2003-2006 GG 4-door sedan
compatible for Mazda6 2003-2006 GG 5-door liftback
compatible for Mazda6 2003-2006 GG 5-door wagon
compatible for Mazdaspeed6/Mazda 6 MPS 2005-2007 4-door sedan

Specification

Top mount: Front pillow ball
Damping: not available
Spring rate Front: 9 kg/mm (504 in/lbs)
Spring rate Rear: 9 kg/mm (504 in/lbs)
Adjustable height: lowering 1-3 inch
Shock type: Twin tube
Spring Preload: 7-10 mm
Color: gold body with black spring

Package included

front complete coilover assembly
rear springs and spring adjusters and shocks
A pair wrench for height adjustment

Dimension

Package dimension : 63*51*21
Weight: 25160g

Feature

1. Lowered height adjustment from 1" - 3" which allow lower center of gravity and also add a more aggressive stance.
2. Pillow ball top mounts improve the steering feel and response.
3. Twin-Tube structure allows sufficient stroke within the shock absorber.
4. High Tensile performance spring - STRESS TESTED OVER 600,000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability and performance.
5,Separate height adjustment does not affect damper stroke and height can be adjusted with coilovers installed on the vehicle.
6, Steel shock bodies with special surface treatment to improve the durability.
7, Full rebuildable


Warranty: one year warranty for any manufacturing defect

Write a review

Add photos(0/4)

Note: HTML is not translated!
    Bad           Good

Enter your destination to get a shipping estimate.


CONTINUE
*

*Please select a category!

Recommended By
 
"You can tell a huge difference from these coilovers from the older ones."
--DBGarage
65.1K subscribers
 
 
"These have a new design of the damper and some racing oil that is in it and they do have customizable spring rates. it's riding awesome I am really impressed with this car."
--Texas Honda Channel
44.7K subscribers
 
 
"The T7 maxpeedingrods coilover uh feels freaking great compared to the sp1 compared to the gray body the red body or even the yellow body coilover and uh you know I most definitely do recommend it remember I only use things I know work and I only recommend stuff that I do know works."
--YoungStatic
152K subscribers
 
 
"I really like the way it felt 11 and 7K. this set is it says occasional track use more spirited driving if that's what you're going to use it for then. I really like the way they feel I've only driven on one event so far driving."
--Garage Built Hondas
89.5K subscribers
 
 
"Super impressed. I'm not hearing any clunking noises.These rides are incredible."
--Texas Honda Channel
44.7K subscribers
 
 
"Well there it is guys it's definitely not slammed like i was going for it, but i will say i can definitely get it to go a lot lower I know the front has more adjustment in it,and the rear right now, is all the way down but i can go ahead adjustment collar that we put underneath the spring i can take that out and that will probably give us another half inch."
--DBGarage
65.1k subscribers
 
 
"The lock adjusting tool here is much more robust than on the original style. here you can see how small these are. it's really hard to get some good leverage on them. the newer ones much much larger and really give a nice wrap around of the collar itself. so definitely a nice upgrade."
--Reignited - Cycle and Automotive
58.2K subscribers
 
 
"I think it looks great, the front & back are lowered."
--79th Productions
301K subscribers
 
 
"It is your tire size choice is perfect, it's awesome on these cars it looks so good it looks like it actually makes a little bit of power even though it's an automatic single cam at the moment."
--Tuning by Nick
27.1k subscribers
 
 
"Speaking of spring rates, these do have tons of different options for any application you may need, from a stiff stance setup to a more race-inspired setup."
--DrivenFilms Photography
14.1K subscribers
 
 
"They have in it the new valves inside the chamber of the shock it's it's transferring it fluid a lot better man it's a smoother more quality ride i didn't even really look to see what the spring rate was on them but this thing is riding really good."
--DrivenFilms Photography
14.1K subscribers
 
Please login or create an account to view
and download the installation.

LOGIN

REGISTER

Forgot password
Login with Email Account