GT45 T4 V-BAND Turbo 1.05 A/R 92MM 600+HP + Oil Drain FeedReturn Line kits

Turbocharger

Application

This turbo is a universal application turbo, some modification may be required based on individual vehicle.
Perfect for all 4.0L-6.0L engine

Specification

Exhaust Inlet Flange: T4 Flange
Exhaust Outlet Flange: 3.25 " Inlet Flange 4.25" Clamp V-Band
Compressor Trim: 49.6
Compressor Inducer Diameter: 69 mm
Compressor Exducer Diameter: 98 mm
Compressor Air Inlet Size: 107mm
Compressor Air outlet Size: 86.3mm
Compressor A/R: 0.66
Turbine Trim: 77.6
Turbine Inducer Diameter: 88 mm
Turbine Exducer Diameter: 77.5 mm
Turbine A/R: 1.05

Oil Inlet: M9 & 2*M8*1.25
Oil Outlet: M19 & 2*M8*1.25

Bearing Type: Wet Float
Cooling Type: Oil Cooled
Wastegate：Without Wastegate
Hosepower:  Up to 600+HP
Turbo Type:Individual
Universal Fitment:No
Finish:Matte
Condition: 100% Brand New
Package Size:30x 30x 27 cm
Package Weight: 16400g

Package included

1xTurbocharger
1xAdapter
1xFlange gasket
2xOil port gaskets

Feature

1. Cost-effective Turbo increase 20-40% power for your car
2. Ductile Iron QT450-10 turbine housing - Temperature resistant up to 700℃
3. K418 Alloy turbine wheel- High oxidation stability AND resistance up to 900℃
4. Cast aluminium blades with good gas tightness and corrosion resistance
5. ZL104 aluminum compressor housing with lightweight
6. 100% balancing Test by TURBOTECHNICS VSR3

Note

* The degree of modification of the universal turbo depends on your individual vehicle.
* Professional installation is highly recommended.
* This Turbo is not OE parts. Please check the specifications and compatibility before purchasing.
* Before installation, please check the oil supply sufficient,clearnliness the air filter and gasoline,and the gasoline air tightness.

Oil Feed Return Line Kits

Turbo Oil Feed Lines Oil Drain Return Line T3 T4 T04E T3T4 T70 ,GT28

Specification

*Item condition: 100% Brand New
*Oil return line length: 550mm
*Oil return line inner diameter: ¢21
*Oil feed line length: 1000mm
*Oil feed line inner diameter: ¢14
*Hose end fitting: 10 AN
*Material: High Strength Steel with Aluminum Material
*Quantity: Comes with gasket, screws, etc. Exactly the same as shown in the picture
*Package size: 36cm*29cm*3cm
*Weight: 0.8g

Feature

* Easy to install and apply
* Material: High Strength Steel with Aluminum Material
* Complete kit for oil feed and drain return lines.Gasket,screws,washer all fittings are made with hight quality aluminum.
* Stainless steel drain line hose, braided for heat and  pressure resistance, strength and durability
* The kit provides a anodized look, and gives a best cooling on your turbo and long lasting life.

Note

*This is a universal kit. Not all the component parts will be directly bolt on your car. You may still need some accessaries for your OEM oil line kit.
* Professional installation is highly recommended (No Instruction Included)