GT45 T4 Billet V-band Flange TurboCharger 600+HP + Oil Drain Feed Return Line

Turbocharger

Application: 

This turbo is a universal application turbo, some modification may be required based on individual vehicle.
Perfect for all 4.0L-6.0L engine

Specification:

Exhaust Inlet Flange: T4 Twin Scroll Flange
Exhaust Outlet  Flange:  3.25 " Inlet Flange 4.25" Clamp V-Band
Compressor Trim:   49.6
Compressor Inducer Diameter:   69 mm
Compressor Exducer Diameter:   98 mm
Compressor Air Inlet Size:   107mm
Compressor Air outlet Size:   86.3mm
Compressor A/R:   0.66
Turbine Trim:   77.6
Turbine Inducer Diameter:   88 mm
Turbine Exducer Diameter:   77.5 mm
Turbine A/R:   1.05
Bearing Type:   Wet Float
Cooling Type:   Oil Cooled
Oil Inlet: M9 & 2*M8*1.25
Oil Outlet: M19 & 2*M8*1.25
Wastegate：Without Wastegate
Hosepower:    Up to 600+HP
Condition:   Brand New
Package Size:   30x 30x 27 cm
Package Weight:   16400g

Feature：

1. Turbine housing: Silicon-Molybdenum - High temperature resistance, highly stable and ductile, corrosion and crack resistant, increases durability and reliability.

2. Turbine Wheel: K419 alloy - High temperature resistance, efficiently converts engine exhaust gasses into kinetic energy, resists thermal breakdown for smooth reliable operation.

3. Billet Compressor Wheel: Forged billet aluminum CNC machined compressor wheel - High efficiency, fast response, lower fuel consumption, smooth operation.

4. Oil Seal: High-speed steel oil seal ring - Abrasion and heat resistant, protects bearings, prevents oil leakage and smoking.

Note:

* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.
* Make sure the oil drain line is lower than the turbo itself.
* Ensure exhaust outlet are well sealed by welding
* Professional installation is highly recommended.
* This Turbo is not vehicle specific. Please check the specifications and verify compatibility prior to placing your order.
* Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed and eliminated (e.g. insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc.)!

Oil Feed Return Line Kits

Turbo Oil Feed Lines Oil Drain Return Line T3 T4 T04E T3T4 T70 ,GT28

Specification

*Item condition: 100% Brand New
*Oil return line length: 550mm
*Oil return line inner diameter: ¢21
*Oil feed line length: 1000mm
*Oil feed line inner diameter: ¢14
*Hose end fitting: 10 AN
*Material: High Strength Steel with Aluminum Material
*Quantity: Comes with gasket, screws, etc. Exactly the same as shown in the picture
*Package size: 36cm*29cm*3cm
*Weight: 0.8g

Feature

* Easy to install and apply
* Material: High Strength Steel with Aluminum Material
* Complete kit for oil feed and drain return lines.Gasket,screws,washer all fittings are made with hight quality aluminum.
* Stainless steel drain line hose, braided for heat and  pressure resistance, strength and durability
* The kit provides a anodized look, and gives a best cooling on your turbo and long lasting life.

Note

*This is a universal kit. Not all the component parts will be directly bolt on your car. You may still need some accessaries for your OEM oil line kit.
* Professional installation is highly recommended (No Instruction Included)