- * 1.H-Beam con rods compatible for Fiat 500 Old Model 2-cyl 124mm 126mm
- * 2.Advertised Horsepower Rating: 600~800HP
- * 3. Forged 4340 EN24 aircraft chrome moly quality steel
- * 4.Dimensions: Center to center length: 126mm;Big end diameter: 47.13mm;Small end diameter: 20mm;Big end width: 24.7mm;Small end width:18.5mm
- * 5.Package Contents: 2 Pieces of H-Beam Connecting Rods; 4 Pieces of ARP 2000 5/16" bolts (Note: Extra cost for upgrading to ARP L19 bolts)
- * 6.Performance Con Rods
- * 7.Advertised RPM Rating: 7000-9000 rpm
- * 8. Fastener Tensile Strength (psi):200,000 - 230,000 psi
- * 9.Balanced to within +/- 1 gram per end
- * 10.The big end bores are honed to a +/-.01mm tolerance
- * 11.Heat-treating & Shot-peened for remained consistent and strong
Combination offer
- A
- B
- C
- D
- E
- F
- G
- Description
- Reviews (0)
- Q & A ()
- ESTIMATE SHIPPING
- INSTALLATION
- Product Installation
- Technique Instruction
Application
Compatible for Fiat 500 Old Model 2 cylinder 126mm
Notice: Other options C/C: 118/120/124/130mm
Specification
Performance Con Rods
Type: Forged 4340 aircraft chrome moly quality steel for racing
H-beam Conrods Quantity: 2 Pieces a set
Bolts: Including Genuine 5/16" ARP 2000 bolts
Note: Extra cost for upgrading to ARP L19 bolts
Bolts Size: 5/16"
Tolerance: Balanced to +/- 1 gram in set
Piston Bolt Hole: +-4/1000mm
Advertised Horsepower Rating:200HP/piece
Strength of the fastening (PSI): 200,000/230,000 PSI Torque: 48ft ≈ 65 NM
Top acceleration: 9000rpm
warranty: one year warranty for any manufacturing defect
Dimensions
Center to center length:126mm/4.961"
Big end diameter: 47.13mm/1.856"
Small end diameter: 20mm/0.787"
Big end width: 24.7mm/0.972"
Small end width: 18.5mm/0.728"
Feature
1. TüV Certification Con Rods;
2. Material: Forged SAE 4340 Chrome Moly Steel for the highest strength and durability, dedicated for Racing;
3. Genuine ARP 2000 bolts,Optional ARP L19 fasteners available as an upgrade;
4. H-Beam design reduces weight without compromising strength;
5. Heat-treating & Shot-peened for remained consistent and strong. Shot-peened finish to remove the potential for stress risers;
6.100% CNC machined, Precision rod cap alignment dowels;
7. Bores finished to +/- .01 mm;
8. Balanced to within +/- 1 g per rod;
9. Each rod is magnetic particle tested to ensure free of flaws;
10.100% X-rayed, sonic tested;
11. Custom Service.
Note
Professional installation is highly recommended (No Instruction Included)
Custom Service:If there's no conrods you need on our site, we would be happy to help determine your requirements and develop a solution with you to satisfy your needs.
Learn more about CUSTOM SERVICE
Enter your destination to get a shipping estimate.