Coilover Spring Kits compatible for Toyota Celica compatible for FWD 1990-1999 Adjustable Height Coilovers

Introduction

Maxpeedingrods-B2 coil-overs are designed as entry-level for street use. It features height adjustable and adjustable camber plates (applicable for some vehicles), which offer you a lowered stance, and improved performance for your daily use vehicle.


Application

Compatible for Toyota Celica GT GTS compatible for FWD 1989.10- 1993.11 (ST18#)
Compatible for Toyota Celica compatible for FWD 11.1993.11-1999.08 (ST20#)

Pls Note It is not suitable for ST158, AWD

Notice: The coilovers kit will "Lower your car" and does not keep to the original ride height.

 
Specifications

Front top mounts: pillow ball with camber plate
Rear top mounts: pillow ball
Damping adjustable: Not available
Height adjustable: Yes, lowering 25-75mm depending on the vehicle models
Spring rate Front: 10 kg/mm (556 lbs/in)
Spring rate Rear: 6 kg/mm (336 lbs/in)
Spring length Front: 180 mm
Spring length Rear: 230 mm
Spring Preload advised: 7-10 mm
Color: Golden body with black spring

 
Package included

2x front coil-overs
2x rear coil-overs
1x Allen wrench
2x C spanners



Dimension

Package Size: 64*51*21 cm
Weight：30700g

 

Feature

1. Lowered height adjustment from 25-75mm (depends on vehicle models)which allows a lower center of gravity and also add a more aggressive stance
2. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent
3. Adjustable Camber Plate and Pillow ball top mount for sharpening steering response.( for some models)
4. CNC machined Aluminum  top mounts and lockers-- - excellent strength, and save weight
5. Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable
6. High tensile spring---  600,000 times continuously test to assure its high tensile strength.
7. All inserts come with fitted long rubber boots--- To protect the damper better and be durable.
8. Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions
9. Corrosion Finish - Anodized Aluminum And Powder Coated Carbon Steel Parts

 

Note
1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen. 
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.

 

Notice

* Professional installation & alignment suggested.

* Please check our store for other auto parts you may be interested in.

* The coilovers kit will "Lower your car" and does not keep to the original ride height.