Titanizing Conrods Connecting Rods compatible for Audi 80 8C, B4 94-95 Estate RS2 quattro

Application

Compatible for Audi RS2 Quattro 2.2 L 5-cylinder 20v turbo
Fitment Details:
Compatible for Audi 80 8C, B4 1993-1994 Saloon S2 quattro 2226ccm 230HP
Compatible for Audi 80 8C, B4 1994-1995 Estate RS2 quattro 2226ccm 315HP

Specification

Piston Bolt Hole: +-4/1000mm
Advertised Horsepower Rating：250HP/piece
The big end bores are honed to a +/-.01mm tolerance
The connecting rods all include ARP 2000 bolts, which are rated at 220,000 psi, and the optional ARP L19 material at 260,000 psi is available as an upgraded product.Top acceleration: 9000rpm
Torque: 48ft ≈ 65 NM
Material:Titanizing 4340 EN24 aircraft chrome moly quality steel for racing
Quantity: 5 Pieces a setas showing in picture
Bolts:Including GenuineARP 2000 3/8" bolts (Note:Extra cost for upgrading to ARP L19 bolts)
WeightTolerance: Balanced to +/- 1 gram in set
Accessories: You will get exactly as shown in the picture above
Condition: 100% brand new
Warranty: one year warranty for any manufacturing defect

Dimensions

Center to center length: 144mm/≈5.66929 in.
Big end diameter: 50.6mm/≈1.99212 in.
Small end diameter: 20mm/≈0.7874 in.
Big end width: 24.9mm/≈0.98032 in.
Small end width: 24.9mm/≈0.98032 in.

Feature

The density of titanium is significantly lower than that of steel, while maintaining considerable strength, which means that it is lighter than steel, but the strength is very similar.
1. Titanizing can further improve the bending strength of the product;
2. Titanizing will not affect the weight of the connecting rod;
3. Provide a wear-resistant layer, which greatly prolongs the service life of the parts;
4. TüV Certification Con Rods.
5. Material: Titanizing Forged SAE 4340 Chrome Moly Steel for the highest strength and durability, dedicated for Racing.
6. Genuine ARP 2000 bolts ,Optional ARP L19 fasteners available as an upgrade.
7. H-Beam design reduces weight without compromising strength.
8.Heat-treating & Shot-peened for remained consistent and strong, Shot-peened finish to remove potential for stress risers.
9.100% CNC machined,Precision rod cap alignment dowels.
10.Bores finished to +/- .01 mm.
11.Balanced to within +/- 1 g per rod.
12. Each rod is magnetic particle tested to ensure free of flaws.
13.100% X-rayed, sonic tested.
14.Custom Service.

Notice

Professional installation is highly recommended (No Instruction Included)
Custom Service: If there's no conrods you need on our site, we would be happy to help determine your requirements and develop a solution with you to satisfy your needs.