Height Adjustment Coilover compatible for Mini Clubman R55 Wagon Cooper S 4cyl 2007–2014

Introduction

MXR-SLC based on MXR-SNA coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions.

Application

Compatible for Mini Clubman R55 Cooper 2007–2014 compatible for FWD
Compatible for Mini Clubman R55 Cooper D 2007–2014 compatible for FWD
Compatible for Mini Clubman R55 Cooper S 2007–2014 compatible for FWD
Compatible for Mini Clubman R55 Cooper SD 2011–2014 compatible for FWD
Compatible for Mini Clubman R55 compatible for John Cooper Works (JCW) 2007–2014 compatible for FWD
Compatible for Mini Clubman R55 One 2009–2014 compatible for FWD
Compatible for Mini Clubman R55 One D 2010–2014 compatible for FWD


Note: Check strut diameter prior to ordering – suits 51mm front outer strut diameter.


Specifications

Top mounts: Pillow ball top mount with camber plate front.
Damping: 24 ways adjustable damper force
Front Spring Rate: 6kg/mm (336 in/lbs)
Rear Spring Rate:  6kg/mm (336 in/lbs)
Adjustable Height: Yes lowering 1" to 3"
Shock type: Twin tube
Spring Preload: 7-10 mm
- Control Arm Adjustable: +/- 4 Degrees

- Control Arm Eye to-eye range length: 511-571mm/20.12"-22.48

- Control Arm Overall length range: 554-614mm/21.81"-24.17"

 
Product included

2 x front & 2 x rear coilover kit

2 x Rear control arms (Upper or Lower)

2 x sway bar end links +

2 x spanners + hardwares as pictures show

 
Feature

1. Lowered height adjustment from 1" - 3" which allow lower center of gravity and also add a more aggressive stance.
2.Camber plate top mounts help to eliminate the need for a separate camber kit.（Only Front)
3.Pillow ball top mount - It improves the steering feel and response.（Only Front)
4. Twin-Tube structure allows sufficient stroke within the shock absorber.
5. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation.
6. Separate height adjustment does not affect damper stroke.
7. Height can be adjusted with coilovers installed on the vehicle.
8. High Tensile performance spring - STRESS TESTED OVER 600,000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability and performance.
9. Height Adjustment tools included. 
10. Full rebuildable.
11.A 24 rebound dampening adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions.

 
Notice
1. Installation Requirement: Use spacers to prevent movement of rubber boots when installing eye-type coilovers.
2. Regular Inspection: Rubber boots typically last 1-3 years, depending on factors such as vehicle weight, road conditions, climate, and driving habits.  Inspect them every six months or during routine maintenance, and replace them immediately if any damage or signs of aging are observed.
3. Warranty Coverage Notice: Normal wear and tear on rubber components is not covered by warranty.