5KW All IN One Diesel Air Heater Thermostat For Caravan Motorhome Trailer

Small Truck, Big Truck, Light Truck, Heavy Truck, Pickup, Van, Bus, Car, SUV, Boat, Caravan, Forklift, Electric Tricycle, Engineering Vehicle, Yacht, Various diesel mechanical vehicles such as cars, buses, RVs, trucks, engineering vehicles, etc.

Packag included:

Features:

1.Wide application
2.All into one unit, saving space and easy to move
3.Easy to install and remove and maintain.
4.Durable aluminum body.- The combustion chamber, the base and the heat-dissipating scale are all sand-blasted aluminum parts. It is integrally formed, featuring with uniform heat dissipation, fast heat.
5.Energy saving- the optimized frequency conversion ecu accurately controls the injection frequency of the oil pump, and controls the intake air amount with the precise speed to extend the service life of the heater.
6.Reduced noise- effectively reduce noise through blower speed control, silent fan, silent oil pump. The silent fan sleeps peacefully, and the metering oil pump adopts an improved low frequency pulse with low vibration.
7.fast heating & low emissions- volatile technology, the ceramic spark plug heats the fuel to evaporate into a gas, quickly ignites, and fully burns. Low emission air diesel heater, low fuel, and power consumption, suitable for long running 
8.Easy to operate- the vehicle can be preheated by the remote control to eliminate the frost on the windows. At the same time, the remote control can adjust the oil volume, temperature, and wind speed. The heater is equipped with a complete set of assembly parts for easy installation. 
9.Standard accessory- with a complete mounting kit - including all mounting screws, which means all installation kit and instruction are included. Making it easy to install and use

Notice:

*Due to the manual measurement and different measurement methods, please allow 1-3cm deviation.
*Professional installation is highly recommended 
*For any needs please contact us.
*For safety, please stay away from flammable materials
*Keep dry to avoid damage to accessories

Install & Use Attention
1、Try to rotate the impeller to ensure that it can rotate freely and smoothly. If it cannot rotate freely, you need to use a tool to adjust the gap of the impeller.
2、The heater should be directly connected to the power supply to ensure that the battery is above 80A, the power supply current is above 20A, and the voltage is 11.5~12.8V.
3、The intake pipe and exhaust pipe should not be bent too much to keep the ventilation smooth, and ensure that at least 10cm or 0.79in in front of the air inlet
4、When the heater is turned on for the first time, it needs to match with remote control and lead the oil to the main engine.
5、Please gently tear off the protective film on the top of the LCD screen before use.
6、Please provide the machine with good quality diesel.
7、EXhaust pipes must be installed outdoors or outside your vehicle.
8、When assembling the machine, don't reverse the direction of the oil pump.
9、When installing the heater, it must be horizontally with the outlet facing down.
10、When the machine first started, because there was no diesel oil inthe tube, if themachine could not sense the oil in two minutes, itwould stop automatically.After the machine stops running, restart it.
11、When you turn off the heater, it will continue to run until there hasno fuel in it.Do not forcibly disconnect the power supply, or it will damage the machine.
12、Turn the fan on about 1.5min, and the oil pump starts to work.